Design Components
CF Flanges - McMaster or Kurt Lesker - accessories (caps, gaskets and bolts) on the bottom of page in link
|
Part Number: |
FN-C3113100 |
|
Description: |
Nipple, Full, 10 " OAL, CF 2-3/4" CF Fixed, Thru Holes, CF 2-3/4" CF Fixed, Thru Holes 1 1/2" OD Tube |
|
Price as configured: |
$180.0 |
|
Delivery: |
Custom nipples will ship in 7 working days for quantities up to 5. For quantities greater than 5, delivery will be confirmed at point of order. |
|
NOTE: |
This is a no-cancel, no-return item. Please make sure your configuration is correct before continuing. |
Swagelok Fittings - ½” to ¼” swagelok tube fitting adapter
Thermocouples - Omega KMQSS-020U-12
Heater Wire - Nichrome heating wire from HUG Clean room. 24 or 30 BNC.
Fiberglass insulation sleeving -
Reactor Chamber - ½” diameter SS tube. 2” section for now.
Reactor Plumbing - Everything else will be plumbed with ¼” SS tube.
Pressure Sensor - One for reactor pressure and one for vacuum. We will scavenge an Omega 0-200 psia from another reactor. We may need to use the TMD to achieve the best level of insulation. We need to get past 10-3 torr.
Valves - We will need valves, quarter turn and needle type. These will be swagelok valves that we already have.