A first generation of nano powder cell activated by Dr. Stoyan Sargoytchev's (Sarg) sparker. This cell is very similar to the current working cell, containing nano nickel and hydrogen. We have removed the thermo well in the powder area and added a high voltage pass-through with a nickel electrode through the top.

Location: USA USflag

Project leader: Ryan Hunt

Time span: July 2014 - Now

Current progress: Installed and Calibrating

Design Components

am 01. August 2014.

CF Flanges - McMaster or Kurt Lesker - accessories (caps, gaskets and bolts) on the bottom of page in link

Vacuum Chamber

Part Number:	FN-C3113100
Description:	Nipple, Full, 10 " OAL, CF 2-3/4" CF Fixed, Thru Holes, CF 2-3/4" CF Fixed, Thru Holes 1 1/2" OD Tube
Price as configured:	$180.0
Delivery:	Custom nipples will ship in 7 working days for quantities up to 5. For quantities greater than 5, delivery will be confirmed at point of order.
NOTE:	This is a no-cancel, no-return item. Please make sure your configuration is correct before continuing.

Swagelok Fittings - ½” to ¼” swagelok tube fitting adapter

Thermocouples - Omega KMQSS-020U-12

Heater Wire - Nichrome heating wire from HUG Clean room. 24 or 30 BNC.

Fiberglass insulation sleeving -

Reactor Chamber - ½” diameter SS tube. 2” section for now.

Reactor Plumbing - Everything else will be plumbed with ¼” SS tube.

Pressure Sensor - One for reactor pressure and one for vacuum. We will scavenge an Omega 0-200 psia from another reactor. We may need to use the TMD to achieve the best level of insulation. We need to get past 10-3 torr.

Valves - We will need valves, quarter turn and needle type. These will be swagelok valves that we already have.

Platinum RTD’s