Description:

Cell with QSI nano powder

Location: USA USflag

Project leader: Ryan Hunt

Time span: June 2014 - Now

Current progress: Experiment tests, changing parameters

Latest Video | Gallery | RSS feed of all comments

High Voltage Sparky Powder Cell

A first generation of nano powder cell activated by Dr. Stoyan Sargoytchev's (Sarg) sparker. This cell is very similar to the current working cell, containing nano nickel and hydrogen. We have removed the thermo well in the powder area and added a high voltage pass-through with a nickel electrode through the top.

Location: USA USflag

Project leader: Ryan Hunt

Time span: July 2014 - Now

Current progress: Installed and Calibrating

LIVE DATA Experiment Notes

Latest Video | Gallery | RSS feed of all comments

Pictoral Diagram

on 24 Luglio 2014.

Sensor locations for Powder Calorimeter

RTD_1 (Cold): 2.4 cm from top flange

RTD_2 (Hot): 7.8 cm from top flange, reflects the temperature gradient inside the setup

TC_1 (Heater): Located between the outside of the reactor cell and the heater coil

TC_2 (Well): At the same level as TC_1, this is the part of the vacuum that is surrounded on the sides by the reactor cell

TC_3 (Outside): Located between the outer layer of the cell and the two layers of tubing

T_Amb: Ambient reading taken on HUGnet board approximately 4 ft from the cell

T_Top Flange: Located underneath the layers of small tubing on the surface of the top flange

< Prec Succ >

Add comment

JComments